HDPE Pipe Coils - Tulsi Extrusions Ltd Let’s Nature The Green Era.


 
 
 
-->Product-->Back                                                                                                                                                                                                                                                    E-Brochure

HDPE Pipe is a primary alternative to PVC (Poly Vinyl Chloride) pipe for all piping applications and is rapidly gaining market share for potable water, sewer, conduit and ducting, DWV (Drain, Waste and Vent) agriculture, and ground drainage uses. Used Since the 1950's, HDPE has demonstrated its effectiveness through its durability, leak-free performance, corrosion resistance and ductility.  HDPE pipes are durable, leak-free, corrosion resistant, and ductile. Its greater resilience and flexibility makes it less susceptible than PVC to surges, damage from digging, and shifting soils during earthquakes. HDPE is also preferable to PVC as it is chlorine-less, requires fewer additives in its manufacture and has a much higher recycling rate than PVC.  Tulsi HDPE OD Pipes are available from 20mm to 315mm in PE 63, PE80, PE 100range in PN 2.5,4,6,8,10,12.5 and 16 kg/cm2 pressure and Tulsi HDPE ID pipes are available in 2” to 3” with Silicon coated & without coated or as per customer demand.
 
Application

1. In Agriculture

  • For spraying pesticides in Gardens, Long distant delivery of water for Irrigation.
  • Suction & Delivery of water with Pump sets.
  • Drip Irrigation.
  • Sprinkler Irrigation Systems.
  • Lifting water from Bore wells using Air Compressor/Jet Pumps instead of GI Pipes.
  • Lift Irrigation Scheme.
  • For Submersible Pumps s Column Pipes instead of GI Pipes.

2. Industrial

  • Conveying corrosive effluents of Chemical & other process industries like etrochemicals, Paper, Dye-stuffs, Paints, Rayon & Fertilizers.
  • Protective outer cover for telephone cable conduits & telephone duct pipes.
  • Conveying Treated Radio-active waste. Handling edible oils, Fruit juices pulps, Milk & other food material.
  • Conveying acids, alkalis and other corrosive chemicals.
  • Chilled water circulation.
  • Conveying of Sewage, Drainage (Out side & Underground).
  • Air Conditioning & Ducting.
  • Handling of Salt water.

3. Potable Water Supply

  • Water supply in rural & urban areas-even in sub-zero temperatures at high altitudes.
PE Pipes ID
Available in 2" to 3" with Silicon coated & without coated.
PE Pipes Id PE Pipes OD
Available from 20mm to 315mm in PE 63, PE80, PE 100 range in PN 2.5, 4,6,8,10,12.5 and 16 kg/cm2 pressure.
PE Pipes ODPE Coils OD

Table 3 Wall Thickness of Pipes for Material Grade PE 63 (Clause 6.2)

PE Pipes Id

Table 4 Wall Thickness of Pipes for Material Grade PE 80 (Clause 6.2)

PE Pipes Id

Table 5 Wall Thickness of Pipes for Material Grade PE 100 (Clause 6.2)

PE Pipes Id
 
Call us +91 9423571839 Call Us Enquiry Enquiry Email - Contact us Email-Contact us Facebook Twitter Sales Login Dealer Login Photo Gallery Career with us
Copyright © 2014 Tulsi Extrusions Ltd | Privacy policy and Disclaimer, Site Map.