-->Product-->Back                                                                                                                                                                                                                                                    E-Brochure
SWR pipes are manufactured by our company as per specification laid down by Bureau of Indian Standards (IS: 13592- 1992). The range of SWR pipes is between Ø 63 mm and Ø 160 mm with Standard length of 3 Meters in Type A* and Type B*. Similarly, SWR fittings are manufactured as per specification laid down by Bureau of Indian Standards (IS: 14735) and it ranged from Ø 75 mm to Ø 110 mm. Our SWR fittings are available in two quality products: 1) Tulsi Royal Premium and 2) Tulsi Nano Economical.

Our SWR drainage system is an ideal solution for drainage and sewerage applications owing to its superior properties in comparison to conventional drainage systems. We supply SWR pipes and a fittings with one end being rubber ring socketed, as this ring socket reduces installation cost to a great extent. This SWR drainage system is also ultra violet stabilized which eliminates the adverse effect of sunlight and weather and hence it can be safely used for outdoor installation.
*Note: As per IS: 13592-1992, TYPE A pipes are recommended for use in ventilation pipe work and rain water application and TYPE B pipes are recommended for use in soil and waste discharge system.

Product Ranges
SWR Pipe Plain Bend Door Bend Bend 45 Single Tee

SWR Pipe

Plain Bend

Door Bend

Bend 45

Single Tee

Single Tee Door Coupler Single Y Single Y Door Double Tee Double Tee Door

Single Tee Door

Coupler

Single Y

Single Y Door

Double Tee

Double Tee Door

Double Y Double Door Y Vent Cowl Pipe Clip Cleansing Pipe Reducer

Double Y

Double Door Y

Vent Cowl

Pipe Clip

Cleansing Pipe

Reducer

S Trap P Trap Multi Floor Trap Nahani Trap Rubber Ring Lubricant

S Trap

P Trap

Multi Floor Trap

Nahani Trap

Rubber Ring

Lubricant

Application

Sanitation use in Commercial & Residential complexes, Hotels, School & Colleges, Public places i.e. Railway Station, Airport, and Bus Stand etc. for smooth flow of waste & rain water. Drainage installation in Chemical Plants, Sugar Industries, Food processing Industries Milk Dairies.

Joining Instructions
PVC Pipe
  • Make sure the spigot end and inside of sockets clean and the sealing ring is placed evenly in the socket
  • When cutting pipes, make sure they are cut square. Cut end of pipe should be debarred and chamfered to an angle of 15O with a medium file. This is important to avoid displacement of the rubber ring
  • A correct depth of entry of the spigot into the socket is required to allow thermal movement. To achieve this, push spigot fully into the socket (remove sealing ring at this time) and make a mark on the spigot Withdraw the spigot by 10mm and mark the spigot with a bold line. This bold mark indicates the correct depth of entry to allow the necessary expansion gap
  • Apply Tulsi rubber lubricant evenly on the pipe or fitting spigot end and the sealing ring. Then insert the spigot into the socket with light twisting motion. Pull out the pipe to allow for 10mm expansion gap
  • The joint is now complete and required no additional mastics, tape or cement or any other jointing sealants
Call us +91 9423571839 Call Us Enquiry Enquiry Email - Contact us Email-Contace Us Facebook Twitter Sales Login Dealer Login Photo Gallery Carrer with us
Copyright © 2014 Tulsi Extrusions Ltd | Privacy policy and Disclaimer, Site Map.